JSD 50INCH LED TV Backlight strips

Details:

A liquid crystal light bar is a device that uses liquid crystal materials to emit light. It works as follows:

The LCD light bar consists of a transparent substrate and a layer of liquid crystal material. Liquid crystal material is a substance between liquid and solid, with adjustable optical properties. LCD light bars usually use a backlight module as a light source, and an LED chip is a photoelectric conversion device that can convert electrical energy into visible light. When the backlight module is on, it emits white or colored light. These lights are uniform before passing through the liquid crystal material. The liquid crystal material controls the transmission degree of light through an electric field. When the LCD light bar is working, the liquid crystal material will receive a voltage signal through the electrodes, thereby changing the degree of light transmission. A place with a higher degree of transparency lets more light through, while a place with a lower degree of transparency lets in less light. By controlling the power and the direction of the electric field, the LCD light bar can produce different brightness and colors. Taking the RGB liquid crystal light strip as an example, by controlling the brightness and combination of the three colors of red, green, and blue, it is possible to manufacture light strips of various colors. In short, the liquid crystal light bar adjusts the degree of light transmission by controlling the electric field, thereby realizing adjustable brightness and color.

instruction:

How to install the LCD light bar ?

1. Gather tools and materials: LCD light strips, power adapters, connectors, brackets, screws, screwdrivers, and electric drills.
2. Determine the installation position: Choose a suitable location based on the length and position of the light bar. Secure brackets in place using screws.
3. Connect the light bar: Insert the ends of the light bar into the connector and secure them by gently rotating by hand.
4. Install the power adapter: Connect the power adapter to the light bar’s connector to provide power.
5. Connect the power: Plug in the power and ensure the light bar is functioning properly to complete the installation.
6. Adjust brightness and color: If the LCD light bar supports brightness and color adjustments, use the remote control or buttons to customize as needed.
7. Finalize the installation: After installation, check the secureness of the light bar and power adapter. Ensure the area is dry and well-ventilated to prevent safety hazards. Prior to installation, ensure the power cord is disconnected to avoid electric shock accidents.

FAQ